Telephone 01202 478899
sales@woodstockindustrial.com

Grade 5.8 zinc and clear passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer. The studs have external hexagon drive units with one drive unit in each box. Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules. For load data see the appropriate chemical product.

Product Information
The J-Fix Chisel Pointed Studs are suitable for use with Spin-In Capsules and Injection Resin. They come complete with a setting tool in each box for when used with Spin-In Capsules. There is a depth mark to indicate the embedment depth when used either with Spin-In Capsules or Injection Resin at the standard embedment depth. (The plain ended studs are suitable for use with Injection Resin only)

GRADE 5.8 STUDS
Part Number Thread Dia. Stud Length Maximum Fixture Thickness Drill Hole Dia. Hole Depth Embedment Depth Minimum Base Material Thickness Fixture Clearance Hole Tightening Torque
JSTUD08110 M8 110mm 18mm 10mm 80mm 80mm 110mm 10mm 10Nm
JSTUD10130 M10 130mm 25mm 12mm 90mm 90mm 120mm 12mm 20Nm
JSTUD12160 M12 160mm 34mm 14mm 110mm 110mm 140mm 14mm 40Nm
JSTUD16190 M16 190mm 45mm 18mm 125mm 125mm 165mm 18mm 80Nm
JSTUD20260 M20 260mm 55mm 22mm 170mm 170mm 215mm 22mm 120Nm
JSTUD24300 M24 300mm 55mm 26mm 210mm 210mm 265mm 26mm 180Nm
JSTUD30380 M30 380mm 55mm 32mm 280mm 280mm 345mm 34mm 300Nm